Welding, Cutter, and Welder Careers in Arizona

**Requisition ID: 168110**

**Position Summary**

Plan, lay-out, weld, install, test and repair all types of pipe and similar tubular products in accordance with applicable plans, specifications, welding codes and industry standards

**Experience Level**

Skilled

**Primary Responsibilities and Duties**

• Plan, diagram and lay-out for pipe welder’s work

• Coordinate with field labor crew for efficient installations

• Position the weld set up, fit the piping and perform welds involving a high degree of precision independently

• Lay-out, and assemble pipes accurately and according to production standards, quality requirements, safety requirements, code, design, and specifications

• Make welding repairs and substandard welds

• Assist with coordination of any Pre-Fabrication layout or installation

• Assist with rigging of material

• Operate air arc gouger, grinder, stress relieving machine, and other industry machines, tools and equipment

• Estimating sizes, distances, and quantities; or determining time, costs, resources, or materials needed to perform a work activity.

• Inspect subordinate's work for compliance with the contract plans and specifications, point out deficiencies and explain and take any corrective action needed.

**Qualifications**

• Must possess strong working knowledge skills and abilities for position.

• Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision.

• Proficient in the safe and efficient use of electrical, hand tools, power tools and layout tools as well as measurement tools

**Requirements**

• The person in this position needs to constantly move about a construction/industrial site,

so should be able to stand, walk, sit, reach, stoop, kneel, crouch, and/or crawl

• Constantly works in a construction environment and will be exposed to changing outdoor

weather conditions

• Work irregular hours, weekends, overtime and holidays as required

• May be required to use ladders/mechanical platforms/manlifts/scaffold to access

required equipment/work areas (may exceed 200 feet), so must be able to climb and

maintain balance on formwork, steel formwork, stairs, ladders and scaffolds

• Move and work in and around confined and cluttered places, and uneven surfaces

• Must be able to complete tasks in a noisy and dusty environment

• May be required/able to move items weighing up to 50 pounds across

construction/industrial site

• Must have required tools

• Observe and comply with all safety and project rules, perform other duties as required

• Ability to pass pre-access drug and alcohol testing, fit for duty medical and background

check

_We believe in equal opportunity in employment practices without discrimination, and comply with all laws regarding human rights in the provinces where we operate._

Company: TIC_Craft

**Job Description**

Intel Chandler, Arizona Ocotillo Technology Fabrication (OTF) is part of Intel Foundry's Manufacturing and Supply Chain group (FMSC) and is responsible for the high-volume production of Intel silicon using some of the world's most advanced manufacturing processes. As part of Intel's Integrated Device Manufacturer 2.0 (IDM2.0) strategy with Foundry Capability, Intel Chandler, Arizona site is building new fabs for the latest technology nodes including Intel 18A and beyond. This exciting transformation at Intel needs talented candidates with Device engineering experience in Foundry to service local and global customers.

This job requisition is to seek an experienced Device engineer to join OTF to build a strong Yield engineering team including Integration and Device for Intel 18A technology to service global foundry customers. Candidates must possess strong CMOS Device knowledge with experiences in the generation and analysis of device parametric data, design of experiment (DOE) principles, and engineering data analysis tools. The role is focused on CMOS device technology with embedded features to support a range of applications and will work closely with a team of engineers to push the boundaries of device performance, power efficiency, and scaling.

As a Senior Device Engineer, you may be responsible for but not limited to:

+ Collaborate with the manufacturing team to develop and refine fabrication processes that meet device specifications and yield targets.

+ Collaborate with the Development team to develop new device technology and customize newly developed device architectures to customer needs.

+ Develop CMOS logic device technologies with embedded features for various foundry customer use in a large-volume manufacturing environment.

+ Drive the development and implementation of customized semiconductor device technologies, ensuring compatibility with Intel's existing manufacturing processes and platforms.

+ Demonstrated expertise in CMOS semiconductor device physics and fabrication of advanced transistor device architectures.

+ Owning NPI (New Product Introduction) in production fabs and perform product-specific device characteristics optimizations and DOE.

+ Proficiency in data analysis, scripting, and data analytic techniques to accelerate learning.

+ Strong technical problem-solving skills and excellent communication skills, with the ability to convey complex technical concepts effectively.

+ Ability to work collaboratively in a globally diverse, cross-disciplinary team to develop innovative device solutions on an aggressive schedule.

+ Project management by managing timelines and deliverables for multiple projects, providing regular updates and progress report.

+ Excellent communication skills, both verbal and written, with the ability to convey complex technical concepts effectively.

+ Provide technical guidance and mentorship to junior device engineers, fostering a strong culture of continuous learning and development.

+ Desire to learn, lead, and influence cross-functional teams.

**Qualifications**

You must possess the below minimum qualifications to be initially considered for this position. Preferred qualifications are in addition to the requirements and are considered a plus factor in identifying top candidates.

**Minimum Qualifications:**

+ Bachelor's Degree in Electrical Engineering, Physics, or related field of study with 5+ years or a Master's degree with 3+ years of experience in CMOS device engineering, device physics, logic, architecture, and interconnect development on leading-edge technology nodes.

+ Experience in advanced CMOS device technology, preferably in a foundry environment.

+ Experience of foundry NPI activities and trouble-shooting tape-out issues with exceptional communication skills to communicate complex concepts, solutions, and strategic initiatives.

+ Experience with IC wafer fabrication process engineering, manufacturing systems, semiconductor materials, and wafer test (e.g., fabrication areas may include photolithography and advanced patterning, thin film deposition, planarization, defect metrology, or spectroscopy).

+ Experience interpreting product data including inline, e-test, and SORT data, finding failure root cause and inline indicators, and driving for solutions.

**Preferred Qualifications:**

+ Post graduate degree in Electrical Engineering, Physics, or related field of study with 5+years of experience in CMOS device engineering.

+ Hands-on experience in advanced node semiconductor technology device development.

+ Experience working on in 3nm-16nm FinFETs and sub 3nm GAA FETs.

+ Experience in a High-Volume Manufacturing environment.

+ Experience with Process Design Kit (PDK) silicon model target generation and use, silicon-to-simulation correlation, test structure design, device modeling, and electrical characterization.

+ Demonstrated experience managing the balance between foundry and customer needs. Direct experience working with external customers. Familiarity with industry standards and certifications.

+ Requirements listed would be obtained through a combination of industry-relevant job experience, internship experiences, and or schoolwork/classes/research. The specific duties and requirements for a Foundry engineer can vary depending on the complexity of the customers' projects. However, the role is crucial in ensuring customer satisfaction and the successful delivery of customer products.

**Inside this Business Group**

As the world's largest chip manufacturer, Intel strives to make every facet of semiconductor manufacturing state-of-the-art -- from semiconductor process development and manufacturing, through yield improvement to packaging, final test and optimization, and world class Supply Chain and facilities support. Employees in the Technology Development and Manufacturing Group are part of a worldwide network of design, development, manufacturing, and assembly/test facilities, all focused on utilizing the power of Moore’s Law to bring smart, connected devices to every person on Earth.

**Posting Statement**

All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance.

**Benefits**

We offer a total compensation package that ranks among the best in the industry. It consists of competitive pay, stock, bonuses, as well as, benefit programs which include health, retirement, and vacation. Find more information about all of our Amazing Benefits here. (https://jobs.intel.com/en/benefits)

Annual Salary Range for jobs which could be performed in the US $136,990.00-$193,390.00

*Salary range dependent on a number of factors including location and experience

**Working Model**

This role will require an on-site presence. *** Job posting details (such as work model, location or time type) are subject to change.**

**Job Description**

Intel Chandler, Arizona Ocotillo Technology Fabrication (OTF) is part of Intel Foundry's Manufacturing and Supply Chain group (FMSC) and is responsible for the high-volume production of Intel silicon using some of the world's most advanced manufacturing processes. As part of Intel's Integrated Device Manufacturer 2.0 (IDM2.0) strategy with Foundry Capability, Intel Chandler, Arizona site is building new fabs for the latest technology nodes including Intel 18A and beyond. This exciting transformation at Intel needs talented candidates with Process Integration, and Device engineering experience in Foundry to service local and global customers.

This job requisition is to seek an experienced Integration and Device engineer to join OTF to build a strong Yield engineering team including Integration and Device for Intel 18A technology to service global foundry customers. Candidates must possess strong Process integration knowledge which involves designing, developing, and optimizing the sequence of steps required for semiconductor devices, will work with various process technologies like lithography, etching, deposition, and chemical mechanical polishing. Experience and expertise in process integration, device engineering, and customer engineering are preferred.

As a Senior Process Integration Engineer, you may be responsible for but not limited to:

+ Providing technical support to customers for semiconductor products and processes, including design, yield, and performance issues, and drive solutions through collaboration with various Intel teams.

+ Troubleshooting issues related to semiconductor fabrication, including yield problems, process integration, and device performance.

+ Working with FEOL/BEOL Integration, Device, Defect Reduction, and Yield Analysis team members to identify the root cause of yield/performance issues and implement a mitigation plan in the defined timeline to meet committed production yield/performance targets and to support fast-paced yield ramp-up in high-volume manufacturing phases.

+ Owning NPI (New Product Introduction) in production fabs and perform product-specific process optimizations.

+ Work with cross-functional teams for engineering projects to improve product yield, quality, device performance, productivity improvement, and to reduce wafer cost.

+ Providing Engineering support for technical interactions with internal and external customers.

+ Project management by managing timelines and deliverables for multiple projects, providing regular updates and progress report.

+ Excellent communication skills, both verbal and written, with the ability to convey complex technical concepts effectively.

**Qualifications**

You must possess the below minimum qualifications to be initially considered for this position. Preferred qualifications are in addition to the requirements and are considered a plus factor in identifying top candidates.

**Minimum Qualifications:**

+ Bachelor's Degree in Electrical Engineering, Physics, Chemistry, Materials Science or in a STEM relate Major.

+ 5+ years of applied industrial experience in Semiconductor process integration, device physics, logic, architecture and integration, and interconnect development on leading-edge technology nodes.

+ Experience of foundry NPI activities and trouble-shooting tape-out issues with exceptional communication skills to communicate complex concepts, solutions, and strategic initiatives.

+ Experience with IC wafer fabrication process engineering, manufacturing systems, semiconductor materials, and wafer test (e.g., fabrication areas may include photolithography and advanced patterning, thin film deposition, planarization, defect metrology, or spectroscopy).

+ Experience interpreting product data including inline, e-test, and SORT data, finding failure root cause and inline indicators, and driving for solutions.

**Preferred Qualifications:**

+ Post graduate degree in Electrical Engineering, Physics, Chemistry, Materials Science or in a STEM relate Major.

+ 5+ years of applied industrial experience in Semiconductor process integration, device physics, logic, architecture and integration, and interconnect development on leading-edge technology nodes.

+ Work in 3nm-16nm FinFET and sub 3nm GAA

+ Experience in Yield Improvement and High-Volume Manufacturing

+ Experience with Process Design Kit (PDK) silicon model target generation and use, silicon-to-simulation correlation, test structure design, device modeling, and electrical characterization.

+ Experience with eight disciplines (8D) model, process control standards, FDC and SPC response strategy. Leading teams through end-to-end process and working knowledge and application of internal and external industry-standard audits and fully own compliance closure activities.

+ Ability to work across organizational boundaries using a structured problem-solving methodology to resolve process-related problems, quality improvement/tool improvement/ cost improvement actions.

+ Demonstrated experience managing the balance between foundry and customer needs. Direct experience working with external customers. Familiarity with industry standards and certifications.

+ Requirements listed would be obtained through a combination of industry-relevant job experience, internship experiences, and or schoolwork/classes/research. The specific duties and requirements for a Foundry engineer can vary depending on the complexity of the customers' projects. However, the role is crucial in ensuring customer satisfaction and the successful delivery of customer products.

\#Foundry, #Integration, #Device

**Inside this Business Group**

As the world's largest chip manufacturer, Intel strives to make every facet of semiconductor manufacturing state-of-the-art -- from semiconductor process development and manufacturing, through yield improvement to packaging, final test and optimization, and world class Supply Chain and facilities support. Employees in the Technology Development and Manufacturing Group are part of a worldwide network of design, development, manufacturing, and assembly/test facilities, all focused on utilizing the power of Moore’s Law to bring smart, connected devices to every person on Earth.

**Posting Statement**

All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance.

**Benefits**

We offer a total compensation package that ranks among the best in the industry. It consists of competitive pay, stock, bonuses, as well as, benefit programs which include health, retirement, and vacation. Find more information about all of our Amazing Benefits here. (https://jobs.intel.com/en/benefits)

Annual Salary Range for jobs which could be performed in the US $136,990.00-$193,390.00

*Salary range dependent on a number of factors including location and experience

**Working Model**

This role will require an on-site presence. *** Job posting details (such as work model, location or time type) are subject to change.**

Location:

6112 N 56th Ave, Glendale, Arizona 85301 United States of America

MIG Welder 2nd Shift 1:00PM - 9:30PM/M-F

Full Time- Great Benefits

If you are a resourceful person interested in a challenging and rewarding career, consider joining U-Haul’s manufacturing team as a MIG Welder. Our welders use their skills to weld trucks, trailers and support equipment for the largest do-it-yourself moving company in the world.

Our motto is “Hire Fast, Pay Fast." You can start today and get paid today! Schedule a hands-on working interview and get paid for it. We also offer a $100 hiring bonus!

Primary Responsibilities:

· Perform all-position MIG welding to join steel and aluminum metals from 1/16”- to 1”-thick plate.

· Interpret and carry out work orders, blueprints, sketches, and verbal instructions.

· Properly clamp parts into jigs or holding fixtures.

· Clean burrs, spatter, and weld flux from assemblies.

· Hand count material for inventory purposes.

· Wear and maintain protective clothing and equipment including a welding helmet, welding gloves, cotton clothing, safety glasses and steel toe safety shoes.

· Follow all safety practices during assembly and production operations and ensure work areas are maintained in a safe, clean, and orderly manner.

Minimum Qualifications:

+ Successfully passed a plant-administered welding test, which included both hands-on welding and a math-based measurement assessment.

+ Blueprint Reading

+ MIG welding experience

+ Regular attendance is essential.

Work Environment:

The work involves moderate risks or discomforts which require special safety precautions, eg., working around moving parts, machines, fumes, or irritating chemicals. May be required to use protective clothing, or gear such as masks, goggles, gloves, or shields.

Physical Demands:

The work requires physical exertion such as extended periods indoors and outdoors of remaining stationery, traversing spaces, repositioning to reach and use tools, and moving at least 50 lbs. assisted or unassisted.

U-Haul offers our Team Members:

· Full medical coverage

· Prescription plans

· Dental and vision plans

· Registered Dietitian Program

· Gym Reimbursement Program

· Weight Watchers

· Virtual doctor visits

· Career stability

· Opportunities for advancement

· Valuable on-the-job training

· Tuition Reimbursement Program

· Free online courses for personal and professional development at U-Haul University®

· Business-travel insurance

· You Matter Employee Assistance Program

· Paid holidays, vacation, and sick days

· Employee Stock Ownership Plan (ESOP)

· 401(k) savings plan

· Life insurance

· Critical illness/group accident coverage

· 24-hour physician available for kids

· Met Law Legal Program

· MetLife auto and home insurance

· Mindset App Program

· Discounts on cell phone plans, hotels and more

· LifeLock identity theft protection

· Savvy consumer-wellness programs - from health-care tips to financial wellness

· Dave Ramsey’s Smart Dollar Program

· U-Haul Federal Credit Union membership

U-Haul Holding Company, and its family of companies including U-Haul International, Inc. (“U-Haul”), continually strives to create a culture of health and wellness. Consistent with applicable state law, U-Haul will not hire or re-hire individuals who use nicotine products. The states in which U-Haul will decline to hire nicotine users are: Alabama, Alaska, Arizona, Arkansas, Delaware, Florida, Georgia, Hawaii, Idaho, Iowa, Kansas, Maryland, Massachusetts, Michigan, Nebraska, Pennsylvania, Texas, Utah, Vermont, Virginia, and Washington. U-Haul has observed this hiring practice since February 1, 2020 as part of our commitment to a healthy work environment for our team.

U-Haul is an equal opportunity employer. All applicants for employment will be considered without regard to race, color, religion, sex, national origin, physical or mental disability, veteran status, or any other basis protected by applicable federal, provincial, state or local law. Individual accommodations are available on requests for applicants taking part in all aspects of the selection process. Information obtained during this process will only be shared on a need to know basis.

Location:

6112 N 56th Ave, Glendale, Arizona 85301 United States of America

MIG Welder 1st Shift 4:30AM -1:00PM/M-F

Full Time- Great Benefits

If you are a resourceful person interested in a challenging and rewarding career, consider joining U-Haul’s manufacturing team as a MIG Welder. Our welders use their skills to weld trucks, trailers and support equipment for the largest do-it-yourself moving company in the world.

Our motto is “Hire Fast, Pay Fast." You can start today and get paid today! Schedule a hands-on working interview and get paid for it. We also offer a $100 hiring bonus!

Primary Responsibilities:

· Perform all-position MIG welding to join steel and aluminum metals from 1/16”- to 1”-thick plate.

· Interpret and carry out work orders, blueprints, sketches, and verbal instructions.

· Properly clamp parts into jigs or holding fixtures.

· Clean burrs, spatter, and weld flux from assemblies.

· Hand count material for inventory purposes.

· Wear and maintain protective clothing and equipment including a welding helmet, welding gloves, cotton clothing, safety glasses and steel toe safety shoes.

· Follow all safety practices during assembly and production operations and ensure work areas are maintained in a safe, clean, and orderly manner.

Minimum Qualifications:

+ Successfully passed a plant-administered welding test, which included both hands-on welding and a math-based measurement assessment.

+ Blueprint Reading

+ MIG welding experience

+ Regular attendance is essential.

Work Environment:

The work involves moderate risks or discomforts which require special safety precautions, eg., working around moving parts, machines, fumes, or irritating chemicals. May be required to use protective clothing, or gear such as masks, goggles, gloves, or shields.

Physical Demands:

The work requires physical exertion such as extended periods indoors and outdoors of remaining stationery, traversing spaces, repositioning to reach and use tools, and moving at least 50 lbs. assisted or unassisted.

U-Haul offers our Team Members:

· Full medical coverage

· Prescription plans

· Dental and vision plans

· Registered Dietitian Program

· Gym Reimbursement Program

· Weight Watchers

· Virtual doctor visits

· Career stability

· Opportunities for advancement

· Valuable on-the-job training

· Tuition Reimbursement Program

· Free online courses for personal and professional development at U-Haul University®

· Business-travel insurance

· You Matter Employee Assistance Program

· Paid holidays, vacation, and sick days

· Employee Stock Ownership Plan (ESOP)

· 401(k) savings plan

· Life insurance

· Critical illness/group accident coverage

· 24-hour physician available for kids

· Met Law Legal Program

· MetLife auto and home insurance

· Mindset App Program

· Discounts on cell phone plans, hotels and more

· LifeLock identity theft protection

· Savvy consumer-wellness programs - from health-care tips to financial wellness

· Dave Ramsey’s Smart Dollar Program

· U-Haul Federal Credit Union membership

U-Haul Holding Company, and its family of companies including U-Haul International, Inc. (“U-Haul”), continually strives to create a culture of health and wellness. Consistent with applicable state law, U-Haul will not hire or re-hire individuals who use nicotine products. The states in which U-Haul will decline to hire nicotine users are: Alabama, Alaska, Arizona, Arkansas, Delaware, Florida, Georgia, Hawaii, Idaho, Iowa, Kansas, Maryland, Massachusetts, Michigan, Nebraska, Pennsylvania, Texas, Utah, Vermont, Virginia, and Washington. U-Haul has observed this hiring practice since February 1, 2020 as part of our commitment to a healthy work environment for our team.

U-Haul is an equal opportunity employer. All applicants for employment will be considered without regard to race, color, religion, sex, national origin, physical or mental disability, veteran status, or any other basis protected by applicable federal, provincial, state or local law. Individual accommodations are available on requests for applicants taking part in all aspects of the selection process. Information obtained during this process will only be shared on a need to know basis.

**Requisition ID: 168071**

**Position Summary**

Effectively lead and manage crew members' daily activities and production according to the project timeline, plans, specifications, codes and industry standards and provide the necessary training on proper safety and operational procedures. Work with or supervise other crafts at levels appropriate to training and skills as requested by project supervision.

**Experience Level**

Lead

**Primary Responsibilities and Duties**

• Plan, coordinate and organize people, equipment, tools and materials to promote the safe, efficient and timely construction of the project.

• Ensure that construction equipment is correctly operated and maintained.

• Maintain accurate reporting records including job quantities, productivity rates, time sheets and daily management reports.

• May assist in developing a weekly schedule and in carrying out sequence of activities for assigned crew.

• Responsible for timely completion of work assignments within the estimated costs while maintaining the company’s reputation for quality workmanship/product.

• Responsible for the safety of those on the crew and will conduct all operations according to all applicable company and government safety rules.

• Will develop and maintain a proper crew attitude by conducting toolbox meetings and communicating safety concerns, work scope, plans and schedules to leadmen and crews.

• Monitor compliance by all employees under his/her supervision with all Company policies

**Qualifications**

• Ability to demonstrate thorough knowledge and skill to perform all essential functions of craft workers under his/her supervision.

• Ability to perform task planning to safely and efficiently carry out all aspects of work assigned, train/ teach safety practices, policies and procedures.

• Have a working knowledge of the scheduling, material control and unit manhour performance, estimating fundamentals and job cost management systems.

• Ability to understand, follow and transmit written and oral instructions and communicate effectively with craft workers under his/her supervision and management/supervision.

• Must be a good communicator, motivator, and team player.

**Requirements**

• The person in this position needs to constantly move about a construction/industrial site,

so should be able to stand, walk, sit, reach, stoop, kneel, crouch, and/or crawl

• Constantly works in a construction environment and will be exposed to changing outdoor

weather conditions

• Work irregular hours, weekends, overtime and holidays as required

• May be required to use ladders/mechanical platforms/manlifts/scaffold to access

required equipment/work areas (may exceed 200 feet), so must be able to climb and

maintain balance on formwork, steel formwork, stairs, ladders and scaffolds

• Move and work in and around confined and cluttered places, and uneven surfaces

• Must be able to complete tasks in a noisy and dusty environment

• May be required/able to move items weighing up to 50 pounds across

construction/industrial site

• Must have required tools

• Observe and comply with all safety and project rules, perform other duties as required

• Ability to pass pre-access drug and alcohol testing, fit for duty medical and background

check

_We believe in equal opportunity in employment practices without discrimination, and comply with all laws regarding human rights in the provinces where we operate._

Company: TIC_Craft

All Things Metal is seeking an entry level Fabrication Shop Foreman to join our growing team! This position is great for someone with experience overseeing smaller teams, or someone who is looking to get their start in a management role. This position will work directly with our shop manager, bay leads and kitting lead to ensure proper training and efficiency. If you are someone with a passion in teaching and training welders, this might be a great opportunity for you.

All Things Metal is a structural and miscellaneous steel fabricator and erector located in Phoenix, Arizona, located off of Central and Pinnacle Peak. We are a fast-paced environment with an existing culture in a challenging industry. We are looking for individuals to help take us to the next level and are here to stay.

We’re excited to welcome seasoned, committed fabrication shop foreman. We seek those who wake up each morning driven by opportunity.

All Things Metal is built by positive, hardworking self-starters. That kind of spark creates an undeniable energy we appreciate and embrace. It keeps the work and the team moving forward and improving. At the same time, we’re fueled by humility. Our team knows when to listen, when to adapt, and when to agree to disagree.

Our shop foreman is a critical part of our team and performs many essential duties.

Qualifications :

+ 1 years minimum experience in relevant lead role (foreman, shop manager, trainer, lead welder etc)

+ Effective written and oral communication skills.

+ Must be punctual, reliable and responsible.

+ Strong organizational skills and time management.

+ Strong leadership skills.

+ Must be a team player.

+ Thorough understanding of structural steel fabrication processes.

+ Extensive knowledge of structural steel welding methods and procedures.

+ Ability to read and interpret complex structural steel assembly and parts drawings.

+ Working knowledge of fabrication tools and equipment.

+ Understanding of Tekla PowerFab, EPM Go (a plus)

Responsibilities :

+ Directly supervise fabrication team, and delegate work accordingly to maintain schedule and meet deadlines.

+ Actively seeks solutions to issues during the fabrication process.

+ · Work directly with fabrication manager to ensure the teams has everything they need to be as efficient as possible.

+ · Responsible for opening the shop daily.

+ · Attend all required meetings.

+ · Perform employee performance reviews, new hire interviews, and disciplinary actions when required.

+ · Maintain safety 100% of the time and enforce required PPE for team members.

+ · Coach and Teach fabrication team.

+ · Uphold all company policies.

+ · Maintain all ATM quality standards.

+ · Maintain all company-built relationships in good standing.

Benefits:

+ Competitive pay, DOE

+ Steady work!

+ First- Time home buyer incentive with optional home buying references and a $500 bonus

+ Dave Ramsey’s SmartDollar Budget & Financial Education Library

+ Full benefits, including PTO/ Sick time

+ Additional company-wide giveaways

+ 401K plan with Profit Sharing Contributions

+ Family friendly culture events

+ Birthday and Work Anniversary perks

Apply today and you will hear back from us soon! Please ensure a valid phone number & email is on file.

Powered by JazzHR

All Things Metal is seeking a dedicated full-time Journeyman Ironworker to join our team.

All Things Metal is a fast-paced environment with an existing culture in a challenging industry. We are looking for individuals to help take us to the next level and that are here to stay. This isn't a temporary position where you'll be laid off in a couple months after you complete a job. We have steady work, with a minimum of 40 hours per week. This position does not require travel outside of AZ and is not per diem.

A Journeyman at All Things Metal is responsible for the accurate erection of structural steel members in accordance with OSHA and AISC guidelines.

This position requires ability to work steel efficiently and accurately to build a level and plumb building in a fast-paced environment.

We are searching for someone to accomplish raising, positioning, aligning and connecting columns beams and other structural members to complete structural framing and miscellaneous steel assemblies.

Requirements:

+ Rigging experience

+ Signal experience

+ Ability to weld 3G & 4G SMAW

+ Bolt up structural members

+ Ability to read Erection and Shop Drawings

+ Ability to fabricate structural members in the field

+ Ability to erect stairs and knowledge of basic stair codes.

+ Ability to manage small projects/small crew

+ Be a mentor for an Apprentice

+ Must have experience installing stairs, guardrails, and grab rails

+ Be proficient in connecting & sequencing of erection (understand the job flow)

+ Plumbing of Structural Steel

+ Ability to use gridlines and benchmarks to complete layout

+ Must be comfortable with heights

+ Knowledge of commercial construction.

+ Fall protection and safety equipment knowledge

+ OSHA 10 Certification

+ Signaling crane, connecting steel, operate powered hand tools, operate forklifts, operate aerial working platforms (with certifications)

+ Maintain welding certifications

Responsibilities:

+ Maintain Safety 100% of the time

+ Be able to pass internal & external random safety audits

+ Always enforce required PPE for all team members

+ Uphold all company policies

+ Be able to complete all assigned tasks with minimal direction

+ Have the knowledge to do the job

+ Maintain all ATM quality standards

+ Maintain all company-built relationships in good standing

Benefits:

+ $24+ an hour depending on experience and work ethic

+ Steady work!

+ First- Time home buyer incentive with optional home buying references and a $500 bonus

+ Dave Ramsey’s SmartDollar Budget & Financial Education Library

+ Full benefits, including PTO/ Sick time

+ Additional company-wide giveaways

+ 401K plan

+ Health Savings Plan/Flexible Spending Account

+ Family friendly culture events

+ Birthday and Work Anniversary perks

Apply today!

Job Type: Full-time

Salary: $24 + per hour

Experience level:

+ 3-5 years (The more the better)

Shift:

+ Day shift

Weekly day range:

+ Monday to Friday

Work setting:

+ Outdoor work

Ability to commute/relocate:

+ Phoenix, AZ: Reliably commute or planning to relocate before starting work (Preferred)

Work Location: Multiple Locations

Powered by JazzHR

**Requisition ID: 168010**

**Position Summary**

Plan, lay-out, weld, install, test and repair all types of pipe and similar tubular products in accordance with applicable plans, specifications, welding codes and industry standards

**Experience Level**

Skilled

**Primary Responsibilities and Duties**

• Plan, diagram and lay-out for pipe welder’s work

• Coordinate with field labor crew for efficient installations

• Position the weld set up, fit the piping and perform welds involving a high degree of precision independently

• Lay-out, and assemble pipes accurately and according to production standards, quality requirements, safety requirements, code, design, and specifications

• Make welding repairs and substandard welds

• Assist with coordination of any Pre-Fabrication layout or installation

• Assist with rigging of material

• Operate air arc gouger, grinder, stress relieving machine, and other industry machines, tools and equipment

• Estimating sizes, distances, and quantities; or determining time, costs, resources, or materials needed to perform a work activity.

• Inspect subordinate's work for compliance with the contract plans and specifications, point out deficiencies and explain and take any corrective action needed.

**Qualifications**

• Must possess strong working knowledge skills and abilities for position.

• Ability to understand, follow and transmit written and oral instructions and communicate effectively with management/supervision.

• Proficient in the safe and efficient use of electrical, hand tools, power tools and layout tools as well as measurement tools

**Requirements**

• The person in this position needs to constantly move about a construction/industrial site,

so should be able to stand, walk, sit, reach, stoop, kneel, crouch, and/or crawl

• Constantly works in a construction environment and will be exposed to changing outdoor

weather conditions

• Work irregular hours, weekends, overtime and holidays as required

• May be required to use ladders/mechanical platforms/manlifts/scaffold to access

required equipment/work areas (may exceed 200 feet), so must be able to climb and

maintain balance on formwork, steel formwork, stairs, ladders and scaffolds

• Move and work in and around confined and cluttered places, and uneven surfaces

• Must be able to complete tasks in a noisy and dusty environment

• May be required/able to move items weighing up to 50 pounds across

construction/industrial site

• Must have required tools

• Observe and comply with all safety and project rules, perform other duties as required

• Ability to pass pre-access drug and alcohol testing, fit for duty medical and background

check

_We believe in equal opportunity in employment practices without discrimination, and comply with all laws regarding human rights in the provinces where we operate._

Company: TIC_Craft

A position at White Cap isn’t your ordinary job. You’ll work in an exciting and diverse environment, meet interesting people, and have a variety of career opportunities.

The White Cap family is committed to Building Trust on Every Job. We do this by being deeply knowledgeable, fully capable, and always dependable, and our associates are the driving force behind this commitment.

White Cap is hiring immediately for a **Fabricator** !

Do you want a part in helping to _Build America?_ As the leading North American distributor for professional contractors, the White Cap family of brands supplies of our nation’s largest construction projects, including stadiums, roads, bridges, highways, residential housing and more. We are hiring immediately for a **Fabricator!**

_Why a_ **_career_** _with White Cap?_

+ **Comprehensive wellness and financial benefits:** White Cap offers excellent benefits, including Medical, Dental, Vision, 401(k) with company match, tuition reimbursement, and more!

+ **Relax and recharge:** We offer a generous time off package, including paid maternity, parental leave, sick time, and vacation time.

+ **Stability:** Since 2020, White Cap has doubled in size and continues to grow.

+ **Unlimited career potential:** White Cap is a stable and growing company offering unlimited career potential.

+ **Love where you work:** White Cap has been certified as a _Great Place to Work_ .

+ **Inclusive culture:** Work in a place that values and celebrates who you are.

_A_ **_Fabricator_** _at White Cap…_

+ Examines specifications of the customer’s order using drawings, work orders, or blueprints to determine the characteristics of the finished item, materials to be used, and machine setup requirements.

+ Fabricates work pieces as determined by work order specifications.

+ Retrieves correct materials and performs various fabrication duties.

+ Examine work pieces visually, by touch, or by using a tape rule, calipers, or gauges to ensure product meets desired standards.

+ Package items for shipping. Installs protective devices, to ensure shipped materials do not shift or become damaged during transport.

+ Follows company safety policy and procedures.

+ Performs other duties as assigned.

+ Generally has 0-2 years of experience.

**Preferred Qualifications**

+ Experience with reading blueprints, work orders or analyzing drawings.

+ Knowledge of construction and industrial products.

+ Spanish language proficiency.

If you’re looking to play a role in building America, consider one of our open opportunities. We can’t wait to meet you.

**Functional Area** Field Operations

**Work Type** On-Site

**Recruiter** Parnell, Korishawna

**Req ID** WCJR-023967

White Cap is an Equal Opportunity Minority/Female/Individuals with Disabilities/Protected Veteran and Affirmative Action Employer. White Cap considers for employment and hires qualified candidates without regard to age, race, religion, color, sex, sexual orientation, gender, gender identity, national origin, ancestry, citizenship, protected veteran or disability status or any factor prohibited by law.